Cam Follower Wear

From the choices you have made the problem you are experiencing
is most likely to be caused by problems with
the selection of shear cam

The most likely causes are:	Remedial Actions after overhaul are:
Incorrect Selection of Cam for Job (too Slow) Glass too Cold Excessive Air Spring Pressure Foreign Object Obstruction Incorrect Use of Mechanical Latchout during normal operation Insufficient Lubrication	Select Suitable Cam (Faster duty cam) Ensure Suitable Temperature Adjust Airspring Pressure Remove Obstruction Use Pneumatic Latchout For Normal Operation Ensure Correct Lubrication

Return to FAQ index