Surface Damage Problems

From the choices you have made the problem you are experiencing
is most likely to be caused by problems with the shears set-up

The most likely causes are:	Remedial Actions are:
Incorrect Shear Blade Alignment Incorrect Shear Differential Worn / Damaged Blades Excessive Shear Spray Blades 'Wetting' Glass Cutting off-center Incorrectly adjusted Drop Guides	Realign New Blades Using Alignment Jig and fit Adjust Differential Replace with New Aligned Shear Blades Adjust spray timing (Fit spray timing) Insufficient Shear Sprays Fit New Aligned Blades Adjust Drop Guides

Return to FAQ index